We have developed a set of rim stickers that are both durable, look good and are reasonably easy to install.

These use a strong dimple finish adhesive with a satin finish, so look great when fitted to the rims and offer a substancial protective layer to help guard againdt the actual aluminium trials rims getting damaged.

The set contains 6x front stickers (3 pper side for ease of installation), and 6x Rears. Enough to cover both sides of the front and back rims for standard 21" front and 18" rear rims.

INSTALLATION NOTES:

* A real key to success with any rim sticker is spotlessly clean rims. Spend the time to clean them thoroughly before you start with prepsol, brake cleaner, carb cleaner, or acetone. 

* I like to put the bike on a bike stand so the wheel is off the ground and easily rotated. I find a box, crate or stool to sit on, and get myself at a good working height with my eye line level with the top of the rim.

* Only tool you will need is a hair dry or heat gun (on low - don't go thermo nuclear with these).

* I start by sticking a sticker down following a 1-2mm gap on the outside of the rim, and just lightly touch it down on that outward facing surface of the rim. Then when you have the complete sticker (which is 1/3rd of the rims circumfrence) down on that edge, only then apply a light warming of the sticker with the heat guns (to soften the sticker and make it more pliable) and work the rest of it over the curved inner section and up towards the spokes. 

* When you are happy you have it down well, and any the air bubbles have been massaged out, only then warm the whole sticker and firmly press it down to the rim, locking in the adhesive qualities and amking it stick fast.

* Repeat with the next sticker overlapping the stickers approx 10mm on the previously applied one. NOTE: I try and overlap the stickers so as the wheel rotates the "edge" of the sticker is faciing up as the wheel rotates so there is less chance of it "hooking up" on and debris. The means you have to work clockwise on RHS surfaces, and ant-clockwise when applying the LHS.