BEARING Kickstarter BK1412

This is the bearing that supports the inside of the kickstart shaft on all GASGAS TXT motors 2002 to today.

Failure to keep this bearing in good condition will result in excessive kickstart shaft "wobble", and will eventually crack clutch side case due to shaft deflection when kick starting the bike.

It can be changed without splitting the cases.

It is a "cup" style bearing and can be seen if you look from the left side of the bike, towards the right near the carby base.

You will see it directly behind the kickstart assembly area. It can be punched out after taking out the kick start shaft by using  a drift from the left side knocking towards the right.